NEOZED Fuse System
The NEOZED fuse system is primarily used in distribution technology and industrial switchgear assemblies. The system is easy to use and is also approved for domestic installation.
The MINIZED switch disconnectors are primarily used in switchboard assemblies and control engineering. They are approved for switching loads as well as for safe switching in the event of short circuits.
The MINIZED is also suitable for use upstream of the meter in household applications in compliance with the recommendations of the VDEW according to TAB.
Due to their compact design and small footprint, the NEOZED fuse switch disconnector is primarily used in control engineering.
The NEOZED fuse bases are the most cost-effective solution for the application of NEOZED fuses. All NEOZED bases must be fed from the bottom to ensure that the threaded ring is insulation during removal of the fuse link.
The terminals of the NEOZED bases are available in different versions and designs to support the various installation methods.
Compared to the older DIAZED fuse system, the NEOZED fuse system is significantly more modern:
- Much more compact which saves space in the distribution board
- Modern devices like the MINIZED switching devices combine the functions of a switch disconnector and a fuse base
- Wide range of accessories, such as busbars for one, two or three-phase wiring
- Modern terminals for MINIZED and NEOZED comfort bases – Visible, clear and controllable connection simplifies cable entry
Double terminal chambers permit connection of two wires of different cross-sections, which lowers the power loss of the fuse links.
Even when compared to the internationally prevalent cylindrical fuse system, the NEOZED fuse system has considerable advantages:
- Non-interchangeability – thanks to the use of adapter sleeves (i.e. it is not possible to insert a fuse for larger currents). This is a requirement of numerous wiring regulations in Germany and other European countries
- Switching devices with load switching characteristics allow the safe switching of load currents up to 63 A
DBI Control have often used the Siemens 5SE2325 25A D02 NEOZED fuse in our control systems. If you would like to find out more, about the NEOZED Fuse System or any other Siemens products, please call 01244 288138 or email info@dbicontrol.co.uk today.
Blog Categories
- Blog (236)
Blog Archives
- January 2022 (9)
- September 2021 (1)
- August 2021 (1)
- June 2021 (2)
- May 2021 (5)
- March 2021 (2)
- January 2021 (1)
- December 2020 (5)
- November 2020 (9)
- May 2020 (3)
- April 2020 (2)
- March 2020 (8)
- February 2020 (2)
- January 2020 (15)
- December 2019 (3)
- November 2019 (7)
- October 2019 (14)
- September 2019 (10)
- August 2019 (12)
- July 2019 (8)
- June 2019 (8)
- May 2019 (6)
- April 2019 (10)
- March 2019 (7)
- February 2019 (5)
- January 2019 (7)
- December 2018 (8)
- November 2018 (6)
- October 2018 (8)
- September 2018 (7)
- August 2018 (7)
- July 2018 (10)
- June 2018 (5)
- October 2016 (1)
- July 2016 (1)
- February 2016 (1)
- January 2016 (3)
- December 2015 (3)
- November 2015 (7)
- October 2015 (3)
- January 2014 (3)
- September 2013 (1)
Comments are closed.