Siemens ET 200SP BaseUnits
With the BaseUnits (BUs), the ET 200SP offers a rugged and service-friendly design with permanent wiring:
- No tools needed for one-handed wiring using push-in terminals
- Actuation of the spring NC contacts with a standard screwdriver, with a blade width up to 3.5mm
- Outstanding access due to arrangement of measuring tap, spring NC contacts and cable entry in columns, while at the same time reducing the space required by 64%
- Fault-proof colour coding of the spring NC contacts for better orientation in the terminal panel
- Replacement of I.O modules during operation without affecting the wiring
- Operation with module gaps
- Automatic coding of the I.O modules prevents destruction of the electronics if a module is accidentally inserted in the wrong slot during replacement
- Replaceable terminal box
- Side-by-side latching of the BUs for high mechanical and EMC loads
The different BaseUnits facilitate the exact adaptation to the required type of wiring. This enables users to select economical connection systems for the I/O modules used for this task.
The TIA Selection Tool assists in the selection of the BaseUnits most suitable for the application.
The BaseUnits can be plugged onto DIN mounting rails next to one another beside the interface module, thereby safeguarding the electromechanical link between the individual system components.
An I/O module is plugged onto the BUs, which ultimately determines the function of the respective slot and the potentials of the terminals.
Scalable I.O systems usually offer the possibility of individual load group formation, and in distributed I/O devices this used to require an additional power module, however all of these functions are now integrated into the basic components of the system in the ET 200SP.
For users, this means the elimination of the power module – meaning there is now an additional slot for each load group so greater flexibility in terms of configuration and a saving of storage space.
If you are interested in finding out more about the Siemens ET 200SP BaseUnits or any other Siemens products, please call one of our team members on 01244 288138 or email info@dbicontrol.co.uk.
Blog Categories
- Blog (236)
Blog Archives
- January 2022 (9)
- September 2021 (1)
- August 2021 (1)
- June 2021 (2)
- May 2021 (5)
- March 2021 (2)
- January 2021 (1)
- December 2020 (5)
- November 2020 (9)
- May 2020 (3)
- April 2020 (2)
- March 2020 (8)
- February 2020 (2)
- January 2020 (15)
- December 2019 (3)
- November 2019 (7)
- October 2019 (14)
- September 2019 (10)
- August 2019 (12)
- July 2019 (8)
- June 2019 (8)
- May 2019 (6)
- April 2019 (10)
- March 2019 (7)
- February 2019 (5)
- January 2019 (7)
- December 2018 (8)
- November 2018 (6)
- October 2018 (8)
- September 2018 (7)
- August 2018 (7)
- July 2018 (10)
- June 2018 (5)
- October 2016 (1)
- July 2016 (1)
- February 2016 (1)
- January 2016 (3)
- December 2015 (3)
- November 2015 (7)
- October 2015 (3)
- January 2014 (3)
- September 2013 (1)
Gallery
Comments are closed.