Texa FAN12BNOB Filter Fan
The Texa FAN12BNOB Filter Fan is part of Texa’s FAN product range for electrical cabinet ventilation providing quick installation and simple maintenance.
Air flow rates range from 36 to 930 m³/h.
The standard air flow direction is from the exterior to the interior of the cabinet for all ventilation units.
The use can easily invert this by simply removing and reinstalling the fan in the reverse direction.
The external projection is just 5mm, to eliminate operational problems during transport and use of the cabinet due to excessive external dimensions.
The FAN units are available for the most common supply voltages.
On request, versions for voltages not present in the catalogue can be produced for orders of sufficient quantities.
FAN units can be used together with FIL filter meshes for expulsions of the air from the cabinet.
Available in four sizes and created as part of the FAN unit, they allow the hot air to be expelled from the cabinet while maintaining its ingress protection rating.
Application tips for the FAN range include favouring the use of units with the air flow from the exterior of the cabinet to the interior, if possible.
The resulting slight increase in pressure inside the cabinet precents the ingress of dust through any unsealed cracks.
Also, when choosing the FAN unit, retain a safety margin of at least 10% to consider the decrease in flow rate caused when the fabric filter gets dirty.
If using a high-efficiency filter fabric, bear in mind that the air flow will be reduced.
The use of DC powered FAN units can be the best way to prevent disturbances in monitors or other sensitive equipment inside the cabinet.
If you are interested in the Texa FAN12BNOB Filter Fan, or any other Texa products, please get in touch today on 01244 288138 or sales@dbicontrol.co.uk.
Blog Categories
- Blog (236)
Blog Archives
- January 2022 (9)
- September 2021 (1)
- August 2021 (1)
- June 2021 (2)
- May 2021 (5)
- March 2021 (2)
- January 2021 (1)
- December 2020 (5)
- November 2020 (9)
- May 2020 (3)
- April 2020 (2)
- March 2020 (8)
- February 2020 (2)
- January 2020 (15)
- December 2019 (3)
- November 2019 (7)
- October 2019 (14)
- September 2019 (10)
- August 2019 (12)
- July 2019 (8)
- June 2019 (8)
- May 2019 (6)
- April 2019 (10)
- March 2019 (7)
- February 2019 (5)
- January 2019 (7)
- December 2018 (8)
- November 2018 (6)
- October 2018 (8)
- September 2018 (7)
- August 2018 (7)
- July 2018 (10)
- June 2018 (5)
- October 2016 (1)
- July 2016 (1)
- February 2016 (1)
- January 2016 (3)
- December 2015 (3)
- November 2015 (7)
- October 2015 (3)
- January 2014 (3)
- September 2013 (1)
Gallery
Comments are closed.